Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Orgalloy® RS 6630 BLACK - PA66-GF30... - ARKEMA

Check here, which other Orgalloy R datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Orgalloy® RS 6630 BLACK resin is a fiberglass reinforced polyamide 66 alloy designed for injection molding. This black grade offers an outstanding dimensional stability, chemical resistance to automotive fluids and is ideal for the realization of complex parts.

Main applications:

• Electric connectors
• Sport parts
• Automotive fan shrouds

Packaging:
This grade is delivered dried in sealed packaging (25kg bags) ready to be processed.

Shelf life:
Two years from the date of delivery. For any use above this limit, please refer to our technical services.

加工/物理特性	干 / 已调节	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	8.5 / *	cm³/10min	ISO 1133
温度	275 / *	°C	-
载荷	2.16 / *	kg	-

机械性能	干 / 已调节	单位	Test Standard
ISO数据
拉伸模量	8600 / 8300	MPa	ISO 527
断裂应力	129 / 125	MPa	ISO 527
断裂伸长率	2.6 / 3	%	ISO 527
拉伸蠕变模量, 1h	* / 7900	MPa	ISO 899-1
拉伸蠕变模量, 1000h	* / 5620	MPa	ISO 899-1
无缺口简支梁冲击强度, +23°C	58 / 58	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	50 / 50	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	10 / 11	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	9 / 9	kJ/m²	ISO 179/1eA
肖氏硬度D	79 / *	-	ISO 7619-1

热性能	干 / 已调节	单位	Test Standard
ISO数据
熔融温度, 10°C/min	255 / *	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	237 / *	°C	ISO 75-1/-2
热变形温度, 0.45 MPa	257 / *	°C	ISO 75-1/-2
维卡软化温度, B	204 / *	°C	ISO 306
线性热膨胀系数, 平行	18 / *	E-6/K	ISO 11359-1/-2
线性热膨胀系数, 垂直	110 / *	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	1.6 / *	mm	-
厚度为h时的燃烧性	HB / *	class	IEC 60695-11-10
测试用试样的厚度	3.2 / *	mm	-

电性能	干 / 已调节	单位	Test Standard
ISO数据
相对介电常数., 100Hz	- / 3	-	IEC 62631-2-1
相对介电常数., 1MHz	- / 4	-	IEC 62631-2-1
介质损耗因子, 100Hz	- / 290	E-4	IEC 62631-2-1
介质损耗因子, 1MHz	- / 160	E-4	IEC 62631-2-1
体积电阻率	- / >1E13	Ohm*m	IEC 62631-3-1
表面电阻率	* / >1E15	Ohm	IEC 62631-3-2
介电强度	34 / 34	kV/mm	IEC 60243-1
相对漏电起痕指数	* / 600	-	IEC 60112

其它性能	干 / 已调节	单位	Test Standard
吸水性	3.9 / *	%	类似ISO 62
吸湿性	1.3 / *	%	类似ISO 62
密度	1270 / 1270	kg/m³	ISO 1183

加工推荐（注塑）	价值	单位	Test Standard
预干燥-温度	80	°C	-
预干燥-时间	4 - 8	h	-
注塑熔体温度	270 - 290	°C	-
模具温度	60 - 80	°C	-

函数

典型数据

加工方法

注塑

供货形式

粒料, 黑色

特殊性能

经光稳处理的/耐光的, 经热稳处理的/耐热的

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

其他信息

注塑成型

Processing conditions:
- Drying time (only necessary for bags opened for more than two hours): 4-8 hours at 80°C
- Injection temperature (min-recommended-max): 270-280-290°C 
- Mould temperature (min-max): 60-80°C 

耐化学性

酸类
	硫酸 (5g/100g) (23°C)
碱类
	氢氧化钠溶液 (1g/100g) (23°C)
醇类
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	甲苯 (23°C)
酮类
	丙酮 (23°C)
标准燃油
	含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C)
盐溶液
	氯化锌溶液 (50g/100g) (23°C)
其它
	乙二醇水溶液 (50g/100g) (108°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.